How do you clear the brake light on a BMW?
Answer provided by
- Turn the ignition to the on position but do not start the engine.
- Open the driver’s side door and wait 30 seconds.
- Turn the ignition to the off position and wait another 30 seconds.
- Start the car.
Why wont my parking brake light go off?
If it remains lit after the parking brake is released or if it turns on and off intermittently while you’re driving, it means you need to add brake fluid. If you check the fluid, add as needed and the light still doesn’t turn off, you’ll need to have the brake system inspected.
Why is my brake light still on after changing my brakes?
If your parking brake is off, and the light stays on, it means you brake fluid is low. If your fluid is full and the light is still on… there may be a problem with the hydrulic system or booster. That is a serious light.
What does the yellow triangle mean on my BMW?
Service Vehicle: When your vehicle needs servicing, a yellow symbol will show. If your BMW vehicle service is overdue, it will turn red.
Can I drive with brake pad warning light on?
It is safe to drive with this light on for a short amount of time. As mentioned earlier, the light will come on when you still have some brake pad material left, but if you wait too long and continue driving, you will run out of material and damage the rotors.
How do you reset the brake light on a BMW 320i?
Push and hold the “BC” button of the turn signal stalk until it states “Reset?” let go of the button and push the button back in and hold, a little clock will come up, once the clock graphic besides the reset goes away let go. Turn the car off and resart as normal. The brake light service indicator has now been reset.
How do you reset the red exclamation mark on a BMW?
AndyM said: Start the engine then scroll through the obc until you reach the ‘flat tyre’ symbol with the word RESET. Press in the end of the stalk to select. Press and hold for about 5 seconds and a tick should appear then just drive off and it will reset on the move.