How much HP does a Ford 3000 have?
Ford 3000
| Ford 3000 Power | |
|---|---|
| Engine | 46.7 hp 34.8 kW |
| Gasoline PTO (claimed) | 37 hp 27.6 kW |
| Drawbar (tested) | 35.43 hp 26.4 kW |
| PTO (tested) | 40.63 hp 30.3 kW |
Does Ford 3000 have live PTO?
Some of the available options were differential lock, power steering, Live PTO and hydraulic remote valves. Standard front wheels were 5.5X16 and two options were available for the rear wheels – either 13.6X28 or 14.9X24.
Can a hydraulic pump be rebuilt?
Hydraulic Pump Rebuilding Pumps, motors, valves, controls, and other constituent parts can be repaired as long as their dimensions, tolerances, and clearances are all within the right, prescribed limit. However, sometimes it makes more economic sense to carry out a full rebuild.
How heavy is a Ford 3000 tractor?
Ford 3000 Dimensions
| Ford 3000 Weight | |
|---|---|
| Shipping | 3,700 lbs 1678 kg |
| Operating | 4,185 lbs 1898 kg |
| Ballasted | 6,940 lbs 3147 kg |
What engine is in Ford 3000?
Ford 3000 Engine
| Engine Detail | |
|---|---|
| Ford | |
| Displacement | 158 ci 2.6 L |
| Bore/Stroke | 4.20×3.80 inches 107 x 97 mm |
| Power | 46.7 hp 34.8 kW |
What was the last year the Ford 3000 tractor was made?
The Ford 3000 agricultural tractor was produced yearly for the 10 years between 1965 and 1975. Ford discontinued the model in 1975, replacing it with the model 3600 agricultural tractor.
How do you date a Ford 3000 tractor?
So a tractor that is manufactured in 1965 would have a production code that begins with the number 5. A tractor manufactured in 1971 would have a 1 at the start of its production code (shown above on my Ford 3000). Next comes a letter, which represents the month. January is A, February is B, and so on.
How much oil does a Ford 3000 tractor hold?
Ford 3000 Engine
| Engine Oil | |
|---|---|
| Oil capacity | 8 qts 7.6 L |
Does a hydraulic pump need to be primed?
Not all hydraulic pumps require priming. Some rely on air pressure and gravity to ensure that the suction line and pump remain air-free.
Do hydraulic gear pumps need to be primed?
Gear pumps are self-priming and can dry-lift although their priming characteristics improve if the gears are wetted. The gears need to be lubricated by the pumped fluid and should not be run dry for prolonged periods.
What is the difference between live PTO and independent PTO?
An independent PTO means that the PTO shaft is controlled with a separate clutch. As with a live PTO, this allows for full control over the tractor while separately controlling the PTO. There are two major types of independent PTO; mechanical and hydraulic.