How much power does a Ubiquiti AP use?
Specifications:
| UniFi AP AC Pro Specification | |
|---|---|
| Power Supply | 48V, 0.5A PoE Gigabit Adapter* |
| Maximum Power Consumption | 9 W 20 W with Optional Accessory |
| Max TX Power | 2.4 GHz: 22 dBm 5 GHz: 22 dBm |
| BSSID | Up to Four Per Radio |
What is the range of a ubiquiti access point?
400 ft
The UAP-PRO supports speeds of up to 300 Mbps in the 5 GHz radio band and up to 450 Mbps in the 2.4 GHz radio band. The UAP-PRO offers simultaneous dual-band operation with 2×2 and 3×3 MIMO technology. It has a range of up to 122 m (400 ft) and two Gigabit Ethernet ports.
How many watts does an AP use?
In many cases, 40-45 watts is enough for optimal AP performance. Additional devices powered by PoE that can benefit from more than 30 watts include HD/4K video displays, point-tilt-zoom cameras, POS systems and smart LED lighting.
Which UniFi AP has best range?
The Best UniFi Access Points
- U6-LR ($179): The long-range version of the UniFi 6 Lite.
- U6-Mesh ($179): This is the Wi-Fi 6 version of the FlexHD, suitable for indoor or outdoor installation.
- AC-HD ($349): It’s getting older, but it’s still arguably the best AP for high-density networks.
How many watts is a AP lite?
Specifications
| UniFi AP AC Lite | |
|---|---|
| Buttons | (1) Reset to Defaults |
| Power Method | Passive PoE (Pairs 4, 5+; 7, 8 Return) |
| Power Supply | 24V, 0.5A Gigabit PoE Adapter* |
| Max. Power Consumption | 6.5W |
Does UniFi AP Need power?
* Only the single-pack of the UAP-AC-LITE includes a PoE adapter….Specifications.
| UniFi AP AC Lite | |
|---|---|
| Power Supply | 24V, 0.5A Gigabit PoE Adapter* |
| Max. Power Consumption | 6.5W |
| Max. TX Power 2.4 GHz 5 GHz | 20 dBm 20 dBm |
| Antennas | (2) Dual-Band Antennas, 3 dBi Each |
Does an AP need power?
an AC/DC adapter (if supplied) – some access points may need a power adapter to function. However, most modern access points support Power over Ethernet (PoE), which eliminates the need for external power adapters. a computer – may be necessary for basic (or advanced) access point or network configuration.
Can I use any PoE switch with Ubiquiti?
802.3af – Also known as standard PoE, this is the most common PoE used for Ubiquiti kit and all of their switches support it.
Can I use PoE port as normal port UniFi?
The UniFi Switch may be powered by PoE through the PoE In port or by DC input using a 48V power adapter. PoE can be enabled on the PoE Out port using the UniFi Controller software. PoE passthrough supports 48V (2-pair).
Does Ubiquiti access point need PoE?
Ubiquiti devices use Active PoE output. This means that the voltage the Powered Device (PD) needs is negotiated.