What does the green flashing light on the baler indicate?
THE GREEN “BALE READY” STATUS LIGHT When the green light is on, it indicates that the security relay is rearmed and the system is secure.
What gauge wire is bailing wire?
For cardboard and newspaper baling, you should be looking for 11 to 13 gauge wire. For plastic shrink wrap, other plastics, and foam, you should be looking for 11 or 12 gauge wire.
What is Baliing?
To wrap in a bale or in bales: a machine that bales cotton.
Do you have to break down boxes for a baler?
The size of the baler is an important consideration to make, but decision makers should also be aware of the fact that it should not require any manual labor to place the materials into the baler. For example, it should never be necessary to break down the cardboard boxes before loading them into the baler.
When the orange light is flashing on the baler What does this indicate?
If press plate is down: Check both orange lights are flashing. If only one is illuminated, check the bottom door clamp is fully open. If both aren’t flashing, this indicates an issue with the eject safety switch which requires a technician.
What does the red button on the baler do?
“EMERGENCY STOP” BUTTON By pressing this “Emergency Stop Button”, it will interrupt the baler’s mechanical operations.
What are the parts of a baler?
Chapter 4: Baler Parts and Accessories
- Hydraulic Cylinder: This part exerts the required force to compress the material.
- Ram: Attached to the hydraulic cylinder is the ram.
- Hydraulic System:
- Oil Filter:
- Motors and Other Electrical Components:
- Proximity Switches and Other Types of Sensors:
- Control System:
- Bale Chamber:
How does a baler machine work?
How Do Balers Work? Balers have a steel frame that supports a hydraulic ram powered by an electric motor-driven pump. Hydraulic oil is then pumped under pressure to the cylinder and moves the plunger (ram) against the material that is being baled. The material is packed into a dense block (bale) in the bale chamber.
What gauge wire is used for baling hay?
The machines used to bale hay typically use a 14.5-gauge wire commonly referred to as “farmer wire” or “6500”, which is the amount of feet in a 100# coil of that material.
How much weight can baling wire?
Single-loop bale ties Used with vertical or horizontal balers that require hand-tying. Quincy Recycle offers galvanized wire or black annealed wire. We carry 11-14 gauges which has breaking loads starting at 325 lbs. to 750 lbs.