What is a wide load in NJ?
(a) One escort vehicle shall be required when the width, including load, exceeds 14 feet and/or when the length exceeds 100 feet. (b) Two escort vehicles shall be required when the width, including load, exceeds 16 feet and/or when the length exceeds 120 feet.
How do you get an overweight permit in NJ?
The New Jersey Department of Transportation (NJDOT) is now issuing oversize and overweight permits on behalf of the New Jersey Motor Vehicle Commission. Carriers may apply for permits on-line 24 hours a day, 7 days a week, by visiting NJDOT’s OS/OW permit web site http://nj.gotpermits.com.
How much overhang can you have on a 48 ft trailer?
roughly five additional feet
For shipments moved on a 48-foot trailer, this leaves roughly five additional feet of “free” rear overhang — given the freight is “self-supporting” — in the states that allow it. Anything beyond this five additional feet — and 53 feet total— will, most likely, require an oversized permit.
What size trucks are allowed on the Garden State Parkway?
This system of routes shall be referred to as the “102-Inch Truck Network.” 102-inch wide standard trucks may travel freely for all purposes on these routes. 4. The New Jersey Turnpike, the Atlantic City Expressway and the Garden State Parkway south of Exit 105.
Can you pull two 53 foot trailers?
Big-double trucks-a tractor pulling two trailers, each 40 to 53 feet long-are legal in Arizona, Colorado, Idaho, Kansas, Montana, Nevada, North Dakota, Oklahoma, Oregon, South Dakota and Utah. They also are legal in Florida, Indiana, Massachusetts, New York, and Ohio but only on those state`s toll roads.
What trucks can go on NJ parkway?
“Generally, campers and attached non-commercial trailers and semi-trailers are permitted on the Parkway, even north of (Exit) 105,” he said. “Cars, vans and pick-up trucks pulling trailers are not prohibited.”
Can you double tow in NJ?
It shall be unlawful for any combination of 2 motor-drawn vehicles registered under this Title having gross weight of load and vehicles in excess of the gross weight provided on the registration certificates to be operated on the highways of this State.
How far back can I move my tandems?
When the distance between the first axle of your tandems is 35 feet from the rear axle on your tandems to the last axle of your trailer tandems, you will have to reduce the amount of weight that you load onto your truck.
Do I have to slide my tandems?
By sliding the trailer tandems forward, you will put more weight on the trailer tandems and take weight off the tractor’s drive axles. Conversely, by sliding the trailer tandems toward the rear of the trailer, you will take weight off the trailer tandems and put more weight onto the tractor’s drive axles.
How do I get an oversize permit in New Jersey?
Call (888) 799-8858 for New Jersey Overweight/ oversize permits. 1.Single Trip Oversize/Overweight Permit – Valid for 5 days. Used for the transport of any non-reducible load. 2.Code 23 Overweight/Oversize Route-Specific Permit – Valid for 30 days.
Does NJDOT issue permits for overweight vehicles?
Oversize and Overweight Vehicles The New Jersey Department of Transportation (NJDOT) is now issuing permits on behalf of the New Jersey Motor Vehicle Commission (NJMVC) for all Oversize vehicles, Overweight vehicles, Code 23 registered trailers, and Annual Ocean Borne Container permits.
Do you issue permits for oversize/overweight vehicles?
Welcome to the SUPERLOAD online permitting system. This site issues permits for oversize / overweight vehicles along State Routes Only.
When do I need to notify NJ DOT of an oversize load?
Note: According to NJ Statutes, When the vehicle and/or load is over 14′ in height, the permittee shall notify, before the move is made, all Public Utility Companies, NJ DOT, County and Municipal Traffic Engineering Departments. SIGNS, FLAGS & LIGHTS: “Oversize Load” or “Wide Load” signs required on all overwidth vehicles.