How fast will a 50 hp Mercury outboard go?
However, with a 16-foot boat and a Mercury 50 HP four-stroke outboard, the speed ranges from 30 MPH to 35 MPH. Take note these speeds may decrease depending on the amount of weight or number of people on the boat.
How much HP does a Mercury 50 have?
The Mercury 50 two-stroke develops 50.0hp at 5250rpm with a WOT (wide open throttle) rev range of 5000 to 5500, and with a 1.83:1 gear ratio. It’s available in just one model — the forward-control longshaft with power trim and tilt.
How much is a Mercury 60 hp motor?
$8,999.00. In Stock – Brand New 60 Hp Mercury 4-Stroke Command Thrust outboard motor. Includes Electronic Fuel Injection (EFI) plus Power Tilt & Trim. Command Thrust Lower Unit is geared for greater thrust.
How much does a Mercury 50 hp 4-stroke weight?
247 lbs /
Specifications – 50 EFI
| HP / kW | 50 / 37 |
|---|---|
| Dry weight *Lightest model available | 247 lbs / 112 kg |
| CARB star rating | 3 |
| Bore and stroke | 2.56 x 2.95″ / 65 x 75 mm |
| Ignition | ECM 70 |
Can you troll with a 50 hp outboard?
Registered. Trolling is hard on a 50 hp outboard. It can be done, but will be wearing the motor out before its time. Even a 50 is meant to be run hard, not putt, putt for hours on end.
How fast will a 50 hp 2 stroke mercury go?
The Merc has a top speed of 50 mph. The 1999 Bass Tracker Pro Team 175 has a 2 stroke 50hp Mercury. I am maxing out at 28 mph with 2 people and gear.
How much does a 50 hp Mercury weigh?
248 Lbs
Weight: 248 Lbs. RPM Range: 5000-6000. Displacement: 60.8 cu. in.
How much does a Mercury 50 hp 2 stroke weight?
72 kg
Specifications – 50 LW
| HP / kW | 50 / 37.3 |
|---|---|
| Shaft length | 15″ / 381 mm 20″ / 508 mm |
| Gearcase ratio | 1.85 : 1 |
| Dry weight *Lightest model available | 72 kg |
| Emissions Star Rating | 1 |
Where are Mercury 50 HP made?
Fond du Lac Wisconsin
Its main product is built in a manufacturing plant located in Fond du Lac Wisconsin, which is also the world corporate headquarters.
How do you slow down an outboard motor?
Shut Down Your Boat’s Engine(s) With triple outboards, for example, shutting down the center engine (or leaving it in neutral) will help you troll slower. If that’s not slow enough, use just the center outboard and turn off the two outside motors. With quad outboards, try running just two motors.
How much will a trolling plate slow you down?
Once locked into place the trolling plate will block some of the prop thrust and slow the boat to a 1 to 2 mph trolling speed while allowing the angler to maintain steering control.
How fast is a 50 hp boat motor?
Depending on the type of boat and its weight, 50 hp can power you along at between 15 and 47 miles per hour.
How fast will a 50 HP 2-stroke mercury go?
How much does a new Mercury 150 cost?
$18,114.00. Brand New 150HP Mercury 4-Stroke EFI outboard motor. 25″ XL long shaft fits most modern boats and pontoons.
How much does a 50 hp Mercury outboard cost?
“Outboard Motor” (CC BY-SA 2.0) by mikecogh. On average, the cost of a new outboard motor can be as little as $900 to as much as $25,000 or more. What is hp 150?
How fast does a 50 hp outboard motor go?
How fast can a 10 hp outboard go? As a practical matter , you can get from fifty to maybe eighty mph with a ten hp engine on a light weight motorcycle if you tuck in and have a good fairing . How fast does a 140 hp boat go? ConclusionOptimal Cruise Speed:39.1km/h (21 knots)Cruise Range (Approx) Based on 95% Fuel Capacity:659kmMaximum Speed:7km
How much does a 50 hp Mercury outboard weigh?
Obviously motor weights have many variables, including age, size, accessories, and type. Here is a quick list of average weights for some popular models: 15 hp – 122 lbs. 25 hp – 155 lbs. 40 hp – 220 lbs. 50 hp – 237 lbs. 60 hp – 250 lbs. 75 hp – 350 lbs. 90 hp – 350 lbs.
What is the best electric outboard motor?
Honda Marine BF5. Portability,performance and reliability are the hallmarks of the Honda Marine BF5 tiller-steer outboard model,a motor that’s ideal for small boats and dinghies.