What is Powder River Basin coal?
The Powder River Basin is the largest coal-producing region in the United States. The region includes the Black Thunder Coal Mine, the most productive in the United States, and North Antelope Rochelle Mine, the second most productive.
What is a coal train?
April 2009. A tender or coal-car (US only) is a special rail vehicle hauled by a steam locomotive containing its fuel (wood, coal, or oil) and water. Steam locomotives consume large quantities of water compared to the quantity of fuel, so their tenders are necessary to keep them running over long distances.
How many tons of coal are in a unit train?
around 15,000 tons
Nowadays, 120-car trains are normal with each car carrying roughly 120 tons. Thus the capacity of a modern unit coal train is around 15,000 tons per train.
How much coal is in a coal train?
Each train has approximately 115 cars, and each car carries an average of 116 tons of coal.
How many carriages does a coal train have?
The coal trains usually get up to 84 wagons long and hauled by 2×90’s or 3×82’s, and 2×82’s 1×81 combos.
How much coal does it take to run a train?
It depended on whether you had a good driver or a bad driver. A good driver would run the train smoothly, using less fuel during the trip. These trains would burn about 2.25 to 3.25 tons of coal each hour. The trip would take about four hours – 400 miles at 100 miles per hour.
How many wagons does a coal train have?
The average Aurizon train on the CQCN has around 100 wagons and a pay load of about 8,500 tonnes of coal.
Is Powder River Basin coal exported?
1. How much coal from the Powder River Basin is currently being exported? Thus far, modest amounts are being exported. In 2012, all coal exports from the primary PRB coal-producing states of Wyoming and Montana equaled approximately 3.128 million tons and 9.085 million tons, respectively.
How much coal is left in the Powder River Basin?
The U.S. Geological Survey used a geology-based assessment methodology to estimate an original coal resource of about 1.16 trillion short tons for 47 coal beds in the Powder River Basin; in-place (remaining) resources are about 1.15 trillion short tons.
How much weight does a coal train carry?
The average Aurizon train consists of around 100 wagons and a payload of about 8500 tonnes of coal.
What is the weight of a coal train?
Each loaded coal car (an open-top gondola or bottom dump hopper or bottom dump rapid discharge railcar) weighs an average of 143 tons.
Who shovels coal on a train?
fireman
A fireman, stoker or watertender is a person whose occupation it is to tend the fire for the running of a boiler, heating a building, or powering a steam engine. Much of the job is hard physical labor, such as shoveling fuel, typically coal, into the boiler’s firebox.
How many tonnes does a coal train carriage hold?
Each can carry up to 97.8 tonnes of coal, meaning the 88-wagon trains Aurizon will run from Mount Pleasant will handle roughly 8,600 tonnes per trip.
How many coal cars can a train pull?
Each of the coal trains would be approximately a mile and a half in length, made up of 125-150 cars, depending on car size and type.