What do the lights mean on prep machine?
A red light will flash and a volume of hot water is dispensed into your bottle. 4. 5. The light will change to solid red and there will be a double beep to indicate the end of the first stage. You will need to make up your feed within 2 minutes.
How do you use the Tommee Tippee prep machine?
Place a container under the dispenser spout to capture the water used to clean the system (ideally at least 1.8 litre capacity). Plug in the unit, the tank empty warning light will illuminate. Fill the water tank with freshly boiled water. Wait for the tank empty warning light to go out.
How do you reset a Tommee Tippee bottle maker?
Press the filter volume reset button for 2 seconds to clear the memory. Discard dispensed water. Your system is now ready to use. Before first use you need to run a cleaning cycle – which should take approximately 10 minutes.
How often should you change water in Tommee Tippee perfect prep?
Water is a food stuff, so we recommend using within 1-2 days. If water has been left in the hopper for longer, then please empty and refill before next use.
What does the red temperature light mean on Tommee Tippee machine?
Due to recent weather changes, you may find that your temperature warning light has decided to come on! Don’t worry, this is a key safety feature and can be easily resolved. The Perfect Prep Machine contains a probe that measures the temperature of the water in the tank, preventing it from dispensing water above 25 C.
What does the top light on Tommee Tippee prep machine?
When the light flashes, the filter physically requires changing. Replacement filters are available from the Tommee Tippee website, please follow this link to shop.
Do you put boiled water in prep machine?
The Perfect Prep machine is designed to achieve the same result as following the NHS/World Health Organisation guidelines. The World Health Organisation guidelines were designed for making up a feed without a Perfect Prep machine and state that boiled water, which has cooled for no more than 30-minutes, should be used.
Do you put tap water in prep machine?
Just fill the machine with tap water – you are only creating extra work for yourself by boiling it first. The instructions are very clear, you just need to use tap water. Don’t use boiled and cooled water, or filtered water. Just follow the instructions, OP.
Where is the reset button on Tommee Tippee Perfect Prep?
Press the cleaning button on the side of the machine for 2 seconds to start a cleaning cycle. The cleaning light will illuminate. Allow the cycle to fully complete, using the pause functionality if required. The tank empty warning light will illuminate once the water has flushed through the system.
Can I make up bottles for night feeds?
It is ok to store baby bottles with mixed baby formula in the fridge for up to 24 hours, you may then heat them when you need them. This means you e.g. can make all bottles needed for nightly feeds before you go to bed, keep them refridgerated and heat baby bottle in seconds in the microwave.
Do you use boiled water for Tommee Tippee Prep Machine?
Why is the temperature light flashing on my Perfect Prep?
How do you cool down a prep machine?
Its because of hot weather, the water in the tank has to be quite cold in order to make sure the initial hot shot is cooled down enough to be safe to drink. To remedy just drop a couple of ice cubes in the top (so they melt in the water before it passes through the filter), it cools the whole tank down enough.
How do you know when filter needs changing on prep machine?
The Perfect Prep Machine does have a warning light that will tell you when the filter is due to be changed. The first light (when solid) is purely an indicator.
Can you use tap water on Tommee Tippee prep?
The instructions are very clear, you just need to use tap water. Don’t use boiled and cooled water, or filtered water. Just follow the instructions, OP.
Should you use boiled water in Perfect Prep?
Why is the CALC button flashing on prep machine?
A red warning light will illuminate when the unit requires descaling soon. If the light flashes, you should descale immediately. Remove the filter.
How do you reset the filter on a Tommee Tippee?
Press the cleaning mode button for 2 seconds to empty the tank (ensure a suitably sized receptacle is under the dispenser outlet to collect the water). Then press the filter volume reset button for 2 seconds to clear the memory.