How does a dbx DriveRack work?
dbx designed the DriveRack PA2 to be a complete, easy-to-use loudspeaker management system for all types of musicians. The updated AutoEQ algorithm automatically dials in the ideal EQ for each room. It “listens” to your room via RTA mic (not included), analyzes it, and sets the appropriate speaker levels and room EQ.
How do I factory reset my dbx Driverack pa+?
Press and hold the STORE button at power-up until the following message appears:”! HARD RESET?” – Pressing the PREV PAGE button will start a Factory Reset (All User Programs will become copies of the Factory Programs, all Utility settings will be defaulted, and all Security settings will be defaulted).
What is speaker management system?
What’s a speaker management system? A speaker or PA management system is a multi-function signal processor, connected between the mixer and the amplifiers of a PA. Once it has been properly set, it automatically keeps the final mix sounding good and the speakers safe from damage.
What is the purpose of a DriveRack?
The DriveRack® series are a diverse group of processors that provide control of equalization and loudspeaker management. Used and appreciated in every kind of venue, from houses of worship to big-name world tours, the DriveRack series are the most popular loudspeaker management systems.
How do you unlock DBX PA?
– Rotating the wheel to select either Lock, Unlock or Filter Unlocked the system. – Pressing will unlock the system if it were locked or it will lock the system if it were unlocked.
How do I lock my dbx Driverack 260?
How can I quickly lockout the front panel controls on the DriveRack 260? To lock out the front panel controls press and hold the WIZARD button upon power up (make sure all amplifiers are turned off before performing this procedure). When in the lockout mode, turn the ENCODER until the display reads “System Locked!”.
How do you unlock a PA drive rack?
What does a speaker processor do?
A sound processor connects to your factory stereo through the stereo’s speaker wires. The processor removes the factory sound-shaping, so the signal is clean. The signal is sent to your external amplifier(s). The amps power your front and rear speakers, and subwoofers.