How much does Socapex weight?
57.8 lb
Mole-Richardson 5838 Specs
| Package Weight | 57.8 lb |
|---|---|
| Box Dimensions (LxWxH) | 24 x 24 x 8″ |
What is a Socapex cable used for?
Socapex is a brand of electrical connectors known in the entertainment industry for their 19 pin electrical connectors, commonly known as Socapex connectors. These can often be seen used in film television and stage lighting to terminate the ends of a multi cable.
What is the weight of cable?
Single Core Cables Cu/PVC
| Nominal Area of Conductor | Maximum Conductor Resistance at 20°C | Approx. Cable Weight |
|---|---|---|
| Sqmm | Ohm/KM | kg/km |
| 120 | 0.153 | 1180 |
| 150 | 0.124 | 1480 |
| 185 | 0.0991 | 1810 |
How many circuits does a Socapex cable have?
6 circuits
Special socapex cable is used in the lighting world to carry 6 circuits of power inside 1 multipin cable. The Showsafe connector features 19 pins, an all-metal exterior and locking threads to keep the lines together.
How do you calculate cable weight?
Because its cross-sectional area is machined to such precision, calculating a wire’s weight is as simple as multiplying the cross section by the length by the density of the material.
How is conductor weight calculated?
Weight = Span “A” + Span “B” x W x 1.5 2 W = kg per m (lbs. per ft.) of conductor.
What is the formula of cable?
Cable Design Formulas
| Weight | = | 1362 Gt ( ( d+t )+( d+3t ) f ) = lbs./1,000 ft. |
|---|---|---|
| G | = | specific gravity of tape |
| t | = | tape thickness in inches |
| d | = | diameter of cable under tape in inches |
| f | = | multiplying factor from % lap |
What is cable size formula?
To calculate the Cable Sizing one needs to divide the voltage running through the cable by the target current. For instance, If your wire has a voltage current of 150 Volts and your target is 30 then you divide 150/30. This gives you your target resistance of 5 which is required.
How do you calculate the weight of wire rope?
Using this equation for the 3/8” wire rope, you would calculate the strength as: m = (10.9 103 N) / (9.81 m/s2), which equals 1111 kg….To determine the strength, the calculation m = F / g is used, where:
- m = mass in kilograms.
- F = force (weight) in newtons.
- g = acceleration of gravity (9.21 m/s2)
How do I know what size feeder wire to use?
Determine the minimum feeder conductor size, before you apply any conductor adjustment and/or correction factors, by adding the two following quantities: 125% of the continuous load [215.2] and 100% of the noncontinuous load.
What is the difference between 2 0 and 4 0 feeder cable?
The 4/0 conductors are insulated and intended to be current carrying conductors and the 2/0 conductor is bare and intended to be the grounding conductor. SER cable is available with either copper or aluminum conductors, this product has aluminum conductors.
How do you calculate current carrying capacity of a cable?
Cable Capacity For Cable Current Capacity = 4X Size of Cable in Sq.mm, Ex. For 2.5 Sq.mm = 4×2.5 = 9 Amp.
How do you calculate wire rope load capacity?
To calculate the SWL in kilograms of FSWR square the rope diameter (D) in millimetres (mm) and multiply by 8.
- Formula: SWL (kg) = D2(mm) x 8.
- Formula: D(mm) = √L(kg)
How do you calculate rope strength?
The basic breaking strength factor for manila line is found by multiplying the square of the circumference of the line by 900 lbs. When you purchase line you will buy it by its diameter….How Do You Measure Rope Strength?
| Line Material | Comparison Factor (greater than manila) |
|---|---|
| Polypropylene | 1.4 |