How do you use Polycom?

How do you use Polycom?

How to Use Polycom Video Conferencing

1. Step 1: Turn on the Polycom System. To turn on the unit, hold down the green button on the remote for a few seconds or until you see a blue flashing light on the Polycom unit.
2. Step 2: Turn on the TV Screen.
3. Step 3: Start a Video Conference Call.
4. Step 4: Turn off the Polycom Video Unit.

How do you turn on a Polycom camera?

To power on the Polycom HDX system, do one of the following: • Press the power button on the remote control. Press the power switch on the front of the system. The Polycom splash screen is displayed within about 10 seconds.

How do you use a Polycom remote?

To pair the remote control with Polycom Studio: Long press the Remote Control Pairing button on the bottom of the USB video bar until the LEDs blink blue in the middle with a notification sound. Long press Mute on the remote control until you hear a notification sound.

How do I connect my Polycom to my laptop?

One way to connect is to plug into your laptop both the USB cable to Polycom Studio, and an HDMI or other display cable for the monitor. [Alternatively] your IT department may have a hub device in the room that allows you to plug in just one USB-C cable to connect to both Polycom Studio and the monitor.

How do I control my Polycom camera?

Control the Device Camera

1. Connect the Poly Studio device to your computer, then select the Poly Studio USB video bar tile from your Polycom Companion.
2. Go to User Settings > Camera Control.
3. Control the Poly Studio device through the following functions: Button Name. Description. Zoom In or Out.

How do I reset my Polycom HDX 8000?

To reset the system to its original factory software using the restore button:

1. While the system is powered off, press and hold the restore button.
2. While holding the restore button, press the power button once.
3. Keep holding the restore button for 5 more seconds, then release it.

How do I pair my Polycom remote?

How to Pair the Polycom Studio Remote

1. Turn the Polycom Studio camera bar upside down.
2. Locate the bluetooth pairing button and press the button with your finger until you hear a chime.
3. Long-press the Mute button the remote control until you hear a notification chime.

How do I connect my Polycom system?

Connect Your Polycom Phone

1. Locate the LAN and PC ethernet ports on the bottom of the phone.
2. Connect the ethernet cable for your network into the LAN port.
3. Connect an ethernet cable from your computer or laptop dock/port replicator to PC port, if applicable.
4. Complete the setup process:

How do I connect my Polycom to WIFI?

With the wireless adapter connected, follow the steps below to enable Wi-Fi on the Polycom phone:

1. Go to Settings > Basic > Wi-Fi.
2. Choose the network to connect to and enter the password (if prompted)
3. Select Connect.

How do I connect my Polycom to my TV?

Connect an HDMI cable from the Trio Visual+ to a monitor or TV. Connect the Power Kit to the Trio Visual+ (PoE/PoE+ is also supported). Once the Trio Visual+ gets an IP Address, the monitor or TV should display instructions on pairing the Trio Visual+ to the Trio 8800. Tap the Pair button on the Trio Visual+.

What is the default password for Poly Studio?

(the default password is Polycom12#$)
1. Connect the Poly Studio USB device to your computer, then select the Poly Studio USB video bar tile from your Polycom Companion. 2. Enter the admin password in the Password field (the default password is Polycom12#$).

How do I factory reset my Polycom HDX 7000?

How do you reset a Polycom camera?

Factory Reset Your Poly Studio Device Using Polycom Companion

1. Connect the Poly Studio device to your computer, then select the Poly Studio USB video bar tile in Polycom Companion.
2. Go to Admin Settings > Factory Reset.
3. Select Reset.
4. Select OK to confirm the factory reset. The system restarts automatically.

What is Polycom remote?

Polycom Studio Remote Control. The Polycom Studio USB video bar provides a low-energy Bluetooth remote control, which automatically pairs with the USB video bar when you turn it on for the first time.