What are the parts of a keg coupler?
Parts of a keg coupler
- Check Ball.
- Check Ball Retainer.
- Keg Tap and Tap Lever Handle.
- Probe Seal.
- Body Seal.
- Check valve.
- Tail Piece for 5/16″ Vinyl Hose.
- Hex Nut for Beer Line – ⅜” Bore.
What are beer taps connected to?
Shank. This very important part connects the beer line to the faucet. The shank is a chrome-plated brass tube with external threading.
How does a Sankey keg coupler work?
The coupler is a piece of equipment where the airline, usually consisting of C02 or Nitrogen, and beer product line, come together to tap a keg. Beer exits the top of the coupler and the airline feeds the front of the sanke like this picture below.
What is the most common keg coupler?
Also known as the American Sankey coupler, the D-type keg coupler is the most common on this side of the world. Used by the majority of North American beers, including Molson, Corona, Coors, Budweiser, Miller, PBR, Yuengling, and so many more.
What is a bar Tapper?
A ‘tapping’ is simply the opening of a new beer keg/barrel/cask/firkin, by affixing and opening the tap. A beer tapping event means that one or more brand new kegs will be ‘tapped’, and often implies a new or rare beer to that venue, market, or crowd.
What is a beer spigot?
A beer faucet, also called a beer tap, is the last component your beer touches before it hits your glass. Like all faucets, it’s meant to direct the flow of your brew and help ensure that perfect pour we all strive for. Faucets are also what the tap handle connects to.
What is a KeyKeg?
KeyKegs are essentially a sterile bag within an outer plastic sphere capable of holding pressure. When filled the inner bag expands to fill the outer plastic sphere. When served the beer leaves the bag and the space in the sphere is replaced with the serve gas.
How can you tell the difference between a keg and a coupler?
Beer Keg Couplers and What Is the Difference Between Them?
- D-type coupler – fits U.S. Sankey keg valves.
- U-type coupler – fits some European keg valves.
- G-type coupler – fits some European keg valves.
- S-type coupler – fits European Sankey keg valves.
- A-type coupler – fits most German keg valves.
What is a Cobra coupler?
Keg Coupler Fittings
| Amstel | S Type (“Sankey”) |
|---|---|
| Carling | G Type (“Grundy”) |
| Carlsberg | S Type (“Sankey”) |
| Carlsberg Export | S Type (“Sankey”) |
| Cobra | G Type (“Grundy”) |
What is a keg tap called?
Couplers. A coupler (AKA keg tap) attaches to your keg valve, so it’s important that you choose one that matches your given keg.
What is the tap on a barrel called?
A beer tap is a valve, specifically a tap, for controlling the release of beer. While other kinds of tap may be called faucet, valve or spigot, the use of tap for beer is almost universal. This may be because the word was originally coined for the wooden valve in traditional barrels.
How do you attach a beer line to a coupler?
Attach the beer line to the keg coupler, placing a rubber washer at the connection point. Attach the gas line to the CO2 regulator output barb and tighten screw clamp. Connect the other end of the gas line to the keg coupler and tighten screw clamp.
What is a keg Shank?
The Beer Shank also called a Faucet Shank is a key component of any draft beer despensing system. It’s what connects your beer line to your faucet. Most all shanks will come with a nipple for your beer line to connect to, those without a nipple are referred to as a Pass Through.
What is a key keg coupler?
Product Description. The KeyKeg coupler with integrated safety valve connects KeyKeg to your existing dispensing system. It’s designed for KeyKeg’s 2 compartment system with separation of the dispensing gas from the beverage. Every coupler is delivered with a deflating tool and a bar instruction card.