How do I pair my Sony STR DH550?

Connect the power cable to your receiver, then to your power management device….

Table of Contents

Connect the coax cable from your premium television provider to your cable or satellite decoder.
If you’re using one, connect the coax cable from your outdoor antenna to the back of your TV (for over-the-air TV signal).

How many watts is the Sony STR-DH590?

145 watts
The STR-DH590 is a 5.1 channel receiver (it has two subwoofer outputs but handles them independently), with Dolby TrueHD and DTS-HD Master Audio decoding and on-board DSD decoding. The manufacturer promises 145 watts of power at 6 ohms, 1 kHz, 0.9 percent THD, driving one channel.

Does Sony STR-DH590 have Bluetooth?

Smarter Bluetooth® connectivity Not only can you connect to the STR-DH590 through Bluetooth® and play all your favorite tracks, but with Bluetooth® Standby, you can turn your receiver on straight from your paired smartphone or tablet.

How do I reset my Sony STR DH550?

MULTI CHANNEL AV RECEIVERSTR-DH750/STR-DH550 Hold down MUSIC and press (on/standby) on the receiver. [S.F. CLEAR] appears on the display panel and all sound fields are reset to their default setting.

How do I update Str DH590?

MULTI CHANNEL AV RECEIVERSTR-DH590

Connect the USB flash drive to the POWER SUPPLY port on the rear of the receiver.
Press AMP MENU.
Select “” – “UPDATE” on the display panel.
Select “START”. “READING” will flash, and then “UPDT xxx” (*) will appear on the display panel.

Does Sony STR DH590 have Dolby Atmos?

Advantage of Sony STR-DH590 It supports Dolby Atmos and DTS:X. It has bi-amp capability.

How do I restore my Sony receiver to factory settings?

Reverting to the factory default settings

Turn off the receiver.
Hold down (on/standby) on the receiver for 5 seconds. [CLEARING] appears on the display panel for a while, then changes to [CLEARED *].

How do I update my Sony STR dh790 firmware?

On the display panel, press the AMP MENU key on the remote control. Using the up/down arrow keys on the remote control, select [SYSTEM] and then press ENTER. Using the up/down arrow keys on the remote control, select [UPDATE] and then press ENTER.

What is a 5.2 channel receiver?

5.2 – The same as a 5.1 system but the . 2 now refers to there being 2 subwoofers. 7.2 – 7 Channels of surround consisting of a left speaker, centre speaker, right speaker, a rear-left and right-speaker, and two additional surround speakers typically installed on the side walls.

Do Sony receivers have Bluetooth?

Built-in Bluetooth Not only can you wirelessly stream and play music from compatible Bluetooth devices, but with Bluetooth Standby, you can turn on your receiver remotely.

How do I fix my Sony receiver that won’t turn on?

Manuals are posted on your model support page.

Securely plug your device to a working wall outlet.
Press and hold the POWER button, and unplug it from the wall outlet at the same time.
Release the POWER button.
Make sure that your device has enough ventilation.
Plug your device back into a wall outlet.