Menu Close

How do I reset my OKI toner chip?

Admin

How do I reset my OKI toner chip?

Answer

  1. Press Menu = printer displays “Paper Menu”
  2. Press Next 4x = printer displays “System Menu”
  3. Press Select 1x = printer displays “Factory Defaults”
  4. Press Next 7x = printer displays “Reset Toner Life”
  5. Press Select 1x = printer displays “Resetting Toner Page Count”
  6. Press Ready.

How do I clean Oki B431dn?

LED head cleaning (B411dn/B431dn)

  1. Press the “OPEN” button on the left side of the top of the printer and open the top cover.
  2. Lightly wipe left and right across the entire surface of the LED head (black glass face) with soft tissue paper or a soft cloth.
  3. Close the top cover. DID FAQ SOLVE YOUR PROBLEM?

How do I setup my Oki printer?

Before installing the printer driver, connect the printer to a network using a LAN cable.

  1. Prepare a LAN cable (1) and hub (2).
  2. Turn off the machine.
  3. Insert one end of the LAN cable (1) into the network interface connector.
  4. Insert the other end of the LAN (1) cable into the hub (2).
  5. Turn on the printer.

How do I get my printer online Oki?

The machine is offline. Right-click the printer icon to open “Printer folder”, and then select [See print jobs]. In the dialog, select the [Printer] menu and then clear the check of [Use Printer Offline]. A switch, buffer, extension cable, or USB hub is used.

What does the b431dn printer menu do?

USB menu: B431 Printer Menu This menu controls the operation of the printer’s USB data interface. Network menu: B431dn Printer Menu This menu controls the operation of the printer’s 10Base-T/ 100Base-TX network interface. ITEM DEFAULT REMARKS

How do I troubleshoot a B411 or b431 printer?

134 > B411/B431 Troubleshooting When you try to print nothing happens, but printer indicates it is ready to receive data. Configuration error. Check cable connection. If more than one printer is available, make sure your printer has been selected. Garbage prints. Incorrect cable configuration. Also, see Software Problems.

How do I change the toner in the b431 model?

The B431 model has been illustrated below. The principles are the same for the B411. 99 > B411/B431 Consumables and Maintenance 3. Pull the colored lever (1) on the right side of the toner cartridge towards the front of the printer to close the cartridge then remove the used toner cartridge (2).

How do you reset the toner on an OKI?

On the OKI, the full reset is the only way to reset the toner because of the way they use the chip. They don’t allow resetting of the counter individually like they sometimes do on other parts like the drum or the waste container.

How do I fix toner error?

“Toner Error”

  1. Unplug the power cord from the back of the machine.
  2. Plug the power cord back in.
  3. Verify the exact message on the display of the machine.
  4. Open the top cover.
  5. Remove the toner cartridge and drum unit assemblies.
  6. Verify that a toner cartridge is installed in each of the drum units.

How do I reset my Oki printer?

All the information provided is subject to change from time to time at the sole discretion of Oki Data….To reset the printer:

  1. Press and release the SEL key to take the printer off-line. The SEL light will be out.
  2. Then, press and hold the SHIFT key and press the RESET (CHARACTER PITCH) key.
  3. The printer is reset.

How do I get rid of replace toner message?

Open the front cover. Take the toner & drum unit out of the machine….

  1. Open the front cover of the printer.
  2. Press the Clear / Back button.
  3. Press the * button.
  4. Press the 0 button.
  5. Press the 0 button.
  6. Close the front cover.
  7. This will clear the ‘Toner Low’ error and allow for continuous printing.

Why is my toner cartridge not working?

This could be caused by a number of things, including use of the wrong cartridge model. The most likely fix for this problem is to take the cartridge out. If it’s empty, replace it with a new cartridge. If it still has toner left inside, install it back in the printer, taking care to insert the cartridge properly.

How do I restore my printer to factory settings?

  1. Touch or swipe down the tab at the top of the screen to open the dashboard on the printer control panel.
  2. Select “Setup” and then select “Printer Maintenance”
  3. Select “Restore” and then select “Restore Factory Defaults”
  4. A message appears stating that the factory defaults will be restored.