How much does a new logic board cost for MacBook Pro?
$150-500
Depending on the model of your MacBook Pro, you can expect the replacement logic board to cost anywhere from $150-500.
How much does a logic board for MacBook cost?
MacBook logic board replacements cost $300-$1000, depending on the Mac model. We stock high quality, fully-tested MacBook Pro logic board and MacBook Air logic board. These are the same models with the same part numbers as your logic board and are guaranteed to be fully compatible with your MacBook.
Can you upgrade the logic board on a MacBook Pro?
You can replace your logic board, but it is often expensive. It is the most expensive part of the computer, since it essentially IS the computer. It is possible to replace all model Macbook logic boards though this can turn out to be quite expensive and is usually a last resort.
How do I fix my MacBook Pro logic board?
- Step 1: Open the Top Case. open the top case – you will need a torx °6 screw driver and a small Philips screwdriver.
- Step 2: Remove the Logic Board. Remove the logic board, again you will need a torx °6 and small Philips screw driver.
- Step 3: Bake It! put the logic board on aluminum foil pillars.
- Step 4: Reassemble.
What causes logic board failure MacBook Pro?
The causes of a logic board failure are physical damage, age, overheating, and liquid spills. If one component fails usually the whole motherboard fails. Replacing the faulty components is not as easy it may sound because, one has to know which IC (integrated chip) or filter is faulty.
How do I know if my MacBook Pro logic board is bad?
Logic boards although bad, can still work, but have certain things that don’t work….SYMPTOMS OF A BAD LOGIC BOARD
- Battery not charging.
- Not recognizing battery.
- No backlight/image on screen.
- Randomly crashing.
- USB ports not working.
- Not turning on.
Why do Mac logic boards fail?
Is there a recall on 2017 MacBook Pro?
Apple has determined that, in a limited number of older generation 15-inch MacBook Pro units, the battery may overheat and pose a fire safety risk. Affected units were sold primarily between September 2015 and February 2017 and product eligibility is determined by the product serial number.
How do I replace the logic board on my MacBook Pro?
Use this guide to replace your MacBook Pro’s logic board. Before reattaching the heat sink, it is essential to apply a new layer of thermal paste. Remove the following ten screws securing the lower case to the upper case: Three 13.5 mm Phillips screws. Seven 3 mm Phillips screws.
What are the screws for the 17 inch MacBook Pro unibody?
In the Late 2011 MacBook Pro 17″ Unibody these screws will be T6 Torx. Remove the right fan from the upper case, minding its cable that may get caught.
How do I remove the left speaker from the logic board?
Pull the DC-In board connector out of its socket on the logic board. Pull the cables parallel to the face of the logic board toward the heat sink. Remove the two 7.9 mm Phillips screws securing the left speaker to the logic board. Slightly lift the left speaker assembly away from the logic board.