What does a 58v Ficm do?
The higher output voltage of our 58v FICM forces the fuel injector to open more quickly, which allows the fuel injector to flow slightly more fuel than the lower/stock voltage unit.
Where is the Ficm relay located on a 6.0 Powerstroke?
This relay is located under the hood on the drivers side fender well in the fuse panel next to the firewall.
How do I know if my Ficm is going bad?
What a Failing FICM Looks and Sounds Like. When you aren’t getting 48-volts to the injector coils you get: hard starts, rough idle, loss of power, poor drivability, and excessive smoke out the tailpipe—and in cold weather each of those symptoms will be amplified.
Which tuner is best for 6.0 Powerstroke?
The best tuner for the 6.0 Powerstroke is the Hypertech 3000 Max Energy Spectrum Power Programmer. It offers the most options for the cost and can help you get more power, better fuel economy, and complete insight into the engine’s state.
How much horsepower does a stock 6.0 Powerstroke have?
325 hp
LET’S COMPARE THE HARD FACTS
| 7.3L SPECS | 6.0L SPECS | |
|---|---|---|
| STROKE | 4.18 inches | 4.13 inches |
| VALVETRAIN | Overhead valve, 2 valves per cylinder | Overhead valve, 4 valves per cylinder |
| COMPRESSION RATIO | 17.5:1 | 18.0:1 |
| FACTORY HORSEPOWER | 210 hp (1994.5) to 275 hp (2003) | 325 hp |
How do I know if my Ficm relay is bad?
Calibration concerns, powertrain component faults and FICM malfunctions may produce similar drivability concerns. NOTE: The most common symptoms of a failed FICM are: NO START or CONSTANT MISFIRE AT ALL ENGINE TEMPERATURES. Symptoms other than these are not likely to be caused by the Ford 6.0 FICM module.
Does the Ficm control the fuel pump?
What is a FICM and what does it do? A 6.0 FICM or fuel injection control module is what provides power and control to the fuel injectors.
Do you test the FICM?
We do not test the FICM. PHP FICM Tuning: All PHP tuning utilizes the latest inductive heating strategies strategies for improved cold temperature startups and operation.With 4 power levels to chose from (Economy, Atlas 40, Atlas 80, and Hercules) our programs compliment any ECM tuning, whether it is stock or modified.
Do I need an ECM programmer for the eco tune?
This tune comes with all the benefits of the Eco tune and is okay with or without an ECM programmer, but only if you are running upgraded (4″ or better) exhaust and have a way to measure your exhaust gas temperatures to ensure that they stay under the all-important 1500 degrees Fahrenheit (at which point you run the risk of burning exhaust valves).
Can I add tuning to an old FICM?
Add tuning to any FICM you own that’s still good or any new module you purchase through Full Force Diesel. We do not test the FICM.
Where can I get a tune Flash for my FICM?
Locate a FICM Programming Dealer near you to have a tune flashed onto your truck. You choose which power level you want and they program your truck. The whole process is very quick and easy – all in one stop. Does your FICM need repair?