What can I use for a tetherball pole?
16 gauge galvanized steel line pole. (2) 1 ft. pieces of rebar. cement (180 lbs–we used 3 bags of concrete, 60 lbs.
How much concrete do I need for tetherball?
Materials Required:
- 1-½-inch galvanized steel pipe of desired height plus 2 feet.
- Rebar – 2 pieces, 12 inches long.
- Concrete – 180 lbs.
- Eyebolt with washer and hex nut.
- Safety wire.
- Tetherball with rope (link to Amazon)
- Connecting hook for rope.
How tall is a tetherball pole supposed to be?
10 feet
The pole is often 10 feet (3.0 m) high, and can be as low as 7 feet (2.1 m) high depending upon the height of the players.
How heavy is a tetherball pole?
0.1 Pounds
Technical Details
| Item Package Dimensions L x W x H | 11.26 x 5.71 x 4.25 inches |
|---|---|
| Item Weight | 0.1 Pounds |
| Brand Name | Voit |
| Color | Multicoloured |
| Manufacturer | Sport Supply Group, Inc. |
How do you put a tetherball pole in the ground?
Mix the cement with water (follow instructions on the bag) and pour in the hole until about half of it is filled. Insert the tetherball pole into the cement. Use the level to make sure that the pole is level. Keep the pole level and add the rest of the cement until the cement is three inches from the top.
How much space do you need for a tether ball?
Find a flat open playing area at least 20ft (6.1m) square. For best results many people prefer to anchor the tetherball pole and sleeve to the ground with cement.
How long is the tether ball rope?
All the rules say is that the end of the rope should be 2-feet from the base of the pole. This means that, in most cases, the tetherball rope length is going to be around 8-feet long. However, some junior tetherball sets may demand a shorter rope length (sometimes as short as five feet!)
How do you attach a tetherball pole to concrete?
How long is tetherball cord?
The length of the tetherball rope must sit 2-feet above the ground. The standard pole length for tetherball should be 10-feet above the ground. This means that the average tetherball rope should be around 8-feet in length.
What kind of rope is used for tetherball?
nylon
Tachikara T-Rope is a tetherball attachment rope made of nylon and measures 9.84 feet. Clip attaches to all standard tetherballs and poles.
How long is a tetherball rope supposed to be?
Why did they remove merry-go-rounds?
While there are a few merry-go-rounds still to be found on older playgrounds, most have been ripped out in favor of safer, less rust-prone alternatives. Lawsuits in New Jersey and elsewhere have made officials too skittish to keep this classic piece of equipment.
How do you make a tetherball pole?
If you want to have a permanent tetherball pole, dig a hole with the shovel that’s around 2 feet deep and wide enough for the pole and the rebar. If using the tire to create a movable tetherball, lay the tire flat on the ground.
How do I build a tetherball court?
You can easily build your own tetherball court with a few inexpensive supplies and a bit of time and effort. Create a base for the tetherball pole. Weld two 10-inch (25 cm) pieces of steel rebar together in a cross formation. This will serve as the base for the tetherball pole and will be cemented into a tire.
How do you make a tetherball out of a tire?
If using the tire to create a movable tetherball, lay the tire flat on the ground. Mix the cement according to the directions on the package, using the bucket and water. You will need a few helpers to hold the pole in place while you pour the cement either into the hole or the tire, but over the rebar.
Is there a DIY tetherball set for kids?
We are on a quest to add some really fun things to our backyard, and this DIY tetherball set was an easy weekend project that our whole family loves. After re-discovering tetherball at our friends’ home several weeks ago, the kids begged us to get a tetherball set for them.