How do you reset a zebra LI4278?
Details
- Place the LI4278 scanner into a powered cradle (model # CR0078 or CR0008)
- While the LI4278 is in the cradle, pull and hold the LI4278 trigger for approximately 20-30 seconds until there is a blinking red led light on the LI4278 and it re initializes/resets (emits power up beeps) in the cradle.
How do I pair LI4278?
How to pair as Bluetooth keyboard. (aka connect to a mobile device without plugging in the base)
- Scan “Variable Pin Code” (Section 4-28)
- Scan “Bluetooth Keyboard Emulation” (Section 4-4)
- Turn on Pairing in your tablet settings.
- Wait for your mobile device to find either a Keyboard or your LI4278.
What does a zebra barcode scanner do?
Zebra’s Fixed Industrial Scanners provide trusted decode performance to automatically track and trace items from production through distribution.
Why is my Zebra scanner not working?
If your cordless scanner stops working while scanning items in a different area of your shop, you may be too far away from the cradle, or the signal might be blocked by steel, concrete, or Bluetooth devices. Bring the scanner back towards the cradle.
How do I reset my zebra hand scanner?
Press and hold on the device Power button, Scan/Action button and Vol+ button until the screen is turned OFF. 4. Release the Power and Scan/Action buttons and continue to hold Vol+ button.
How do I setup my Zebra barcode scanner?
To set it up:
- Connect the cradle cable to the port underneath the cradle.
- Connect the cradle to a USB port on your computer.
- Enable an automatic carriage return after a scan by scanning this barcode (also found in the Quick Start Guide packaged with your scanner):
- In Retail POS, click Inventory > Item Search.
Why is my Zebra scanner not scanning?
If your cordless scanner stops working while scanning items in a different area of your shop, you may be too far away from the cradle, or the signal might be blocked by steel, concrete, or Bluetooth devices.
How do you unlock a Zebra scanner?
If you can not unlock the screen, press and hold the power button for about 20 seconds and the phone will turn off. 2- Keep holding on volume down and power keys together for a few seconds in your Zebra TC51. In some devices according to the Android version the combination can be the power key and the volume key up.
Is symbol owned by Zebra?
In 2014, Symbol Technologies became a subsidiary of Zebra Technologies, and is headquartered in Holtsville, New York, on Long Island.
How do I connect my zebra Bluetooth scanner?
Resolution / Answer
- Launch the 123Scan Utility.
- From the upper-right corner, select Barcodes.
- Select Bluetooth bar codes then select Bluetooth cradle pairing bar code.
- From the top, under the Pairing value enter the Bluetooth radio MAC address.
- Click on the Generate bar code button to create the pairing barcode.