How do you read a Toro date code?
Re: Toro serial number identification It is a 2016 model. When it starts with a 2, the second digit is the year. When it starts with a 3, the 2nd and 3rd digits are the year. 24xxxxxx for example would be a 2004 model.
How do you read a Toro lawn mower dipstick?
Checking the Engine-Oil Level
- Move the machine to a level surface.
- Remove the dipstick (Figure 15).
- Wipe off the dipstick end with a clean cloth.
- Insert the dipstick into the oil-fill tube, but do not screw it in, then remove the dipstick.
- Read the oil level on the dipstick (Figure 15).
What do the numbers mean on my lawn mower?
It might say “1 2, 3, 4” or “a, b and c”. Those numbers don’t necessarily correspond to 1 inch, 2 inch, or 3 inches. You need to refer to your owner’s manual to find out what those numbers mean. Or, we can just measure the height of the lawnmower on a hard surface, such as concrete sidewalk or driveway.
Where is Toro Recycler model number?
Toro Recycler and Super Recycler model and serial numbers are printed onto a small white label. This label is located on the rear left corner of the cutting deck.
What level should I set my lawn mower?
The top setting for most mowers gives a cutting height between 3.25 and 4 inches. This is best for your lawn, but at a setting of 4 inches you may sometimes see some “laying-over” of turf blades that some people find undesirable. For this reason, some people prefer to mow at 3 or 3.5 inches.
What model is my Toro lawnmower?
The model number sticker on a Toro lawn tractor can be located in one of five locations: under the seat, on the dash, next to the steering column, on the footrest, or on top of the mower deck.
How do you check the oil on a Toro Super Recycler?
Wipe the dipstick clean with a clean cloth. Insert the dipstick into the oil-fill tube, but do not screw it in, then remove the dipstick. Read the oil level on the dipstick (Checking the Engine-Oil Level).
What level should the oil on a dipstick be?
The dipstick has two marks that stand for “Low” and “Full.” The oil level should be between those marks. In some cars, a dipstick has a cross section instead of marks; in this case, the level should be within the cross section.