What is duct rodder?
A duct rodder is a crucial piece of equipment for underground cable installation. You can clean ducts, locate paths, thread lines, and pull cables. It also allows workers to be more efficient in the cable laying process. This is why it’s so important to have the best duct rodder possible.
What is Rod and roping?
Rod and Roping is when new and existing conduit is proved and feed with rope to assist in the cable hauling on new copper and fibre cable for repairs, upgrades and new infrastructure works.
What is Cobra reel?
Cobra cable reels can be used for installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras. . Rodding reels can also be used for attaching a sonde (mouse) for pipe tracing with a Cable Avoidance Tool..
What does a sonde do?
Used to locate buried plastic Water Pipes, Gas Pipes and any other non-magnetic utility, Sondes are self-contained transmitters that are used with our cable and pipe locators. Sondes are typically attached to a Flexrod, pushed along the pipe, and the position of the Sonde detected from above ground.
What is sonde in oil and gas?
1. n. [Formation Evaluation] The section of a logging tool that contains the measurement sensors, as distinct from the cartridge, which contains the electronics and power supplies.
What is a sonde used for?
What is sonde in drilling?
A sonde transmitter (probe) is a an electronic device that fits inside the drill head housing and transmits a magnetic field to your Ditch Witch locator or DigiTrak locator. In horizontal directional drilling, sondes are used to pinpoint exact location of the drill head during a pilot hole process.
When would it be appropriate to install a Cobra system?
STATIC BREAKING/CABLING If damage is already present (i.e., formation of cracks), we recommend installing a cobra tree cabling system (cobra plus 4 t or cobra 8 t) without a shock absorber or using the low- expansion cobra ultrastatic system, specifically developed for this purpose, as a static breaking/ cabling system …
What sizes of duct rodders do you offer?
We offer various sizes of duct rodders. Rod diameters includes 4 mm, 5 mm, 6 mm, 8 mm, 10 mm, 11 mm, 12 mm, 13 mm, 14 mm, 15 mm, 16 mm. Each rod diameter has its optional length.
What is a duct rodder used for?
FRP duct rodder is commonly used for cable and wire laying in the conduit. With this excellent tool, you can easily thread the cable and wire through the conduit. It shows its strong high tensile strength and elasticity when doing the threading job. Fiberglass duct rodder. Wheeled duct rodder.
What is a toneable duct rod used for?
Toneable Duct Rodders The GMP toneable duct rodders are available in 3/8″ and 1/2 ” diameter. Detectable duct rods are used to find, follow and accuratelymap the duct route without digging or trenching. The traceable duct rod is used in conjunction with both a signal transmitter and a receiver.
How does a sonde work?
The Sonde is pushed down the pipe or conduit with a push rod, then a vLoc receiver or Sonde wand tuned to the same frequency can locate the position and depth from above ground.