How do you write a lock out/tag out procedure?
How to write your LOTO procedures
- Step 1: Preparing for shutdown.
- Step 2: Review the specific LOTO procedure for the asset.
- Step 3: Performing the shutdown.
- Step 4: Locating and disconnecting all energy sources.
- Step 5: Placing locks and tags.
- Step 6: Releasing or blocking any stored energy.
- Step 7: Verifying the lockout.
What is OSHA lockout/tagout procedure?
Lockout and tagout, also known as LOTO, is the OSHA standard for the control of hazardous energy. This exists to protect employees by addressing the necessary steps to disable machinery or equipment that could release hazardous energy or unexpectedly start.
What is the final step in lockout tagout?
The Lockout/Tagout safety last step is about making sure. You have shut down the machines or turned them off, taken out the source of power, and locked them out. Now is the time to double-check your work and make sure it’s safe to continue with the machine or equipment.
What is the last step of any lockout procedure?
A lockout/tagout procedure should include the following six steps:
- Preparation.
- Shutdown.
- Isolation.
- Lockout/Tagout.
- Stored Energy Check.
- Isolation Verification.
What is the most important step in the lockout sequence?
Once the equipment or machine has been isolated from its energy source, lockout/tagout is the next step. This step is the most important in the entire six-step process. The authorized or approved employee will attach the lockout, Tagout devices to an energy-isolating device.
What is the 1st step of performing a simple lockout tagout?
(1) Check the machine or equipment and the immediate area around the machine to ensure that nonessential items have been removed and that the machine or equipment components are operationally intact. (2) Check the work area to ensure that all employees have been safely positioned or removed from the area.
What are the 7 steps to lockout tagout?
LOTO Safety: 7 Steps of lockout tagout
- Prepare for shutdown.
- Notify all affected employees of the activities and equipment involved.
- Shut down the equipment.
- Isolate the equipment from the hazardous energy source.
- Dissipate residual energy.
- Apply applicable lockout or tagout devices.
What are the 7 steps of lock out/tag out?
What should be included in a lockout procedure?
What piece of equipment the procedure is for
How to write lockout tagout procedure and Loto program?
– Documented energy control procedures, including the scope, purpose, authorizations, rules, and techniques used to control energy sources and how compliance will be enforced – Employee training program – Periodic Inspection and performance review of the use of the procedures
What are Lockout/Tagout procedures used for?
A lockout-tagout (LOTO) procedure is a safety system used to prevent accidental or unauthorized access to electrical power sources that are undergoing maintenance or other work.
What is lock out tag out procedure?
Lockout/tagout (LOTO) is a set of procedures that are used to ensure that equipment is shut down, inoperable, and (where relevant) de-energized. This allows maintenance and repair work on the system to be performed safely. Any workplace scenario involving equipment that could lead to the inadvertent release of hazardous energy requires the use