Menu Close

How do I connect Beoplay to my phone?

Admin

How do I connect Beoplay to my phone?

Beoplay A1 Bluetooth connection – Android

  1. Turn on Bluetooth on your Android device.
  2. Verify if Beoplay A1 is listed as an already paired device.
  3. Switch on your Beoplay A1.
  4. Enable pairing mode on your Beoplay A1 by pressing and holding the Bluetooth button for 2 seconds.
  5. Enable the Bluetooth search on your Android device.

How do I set up Beoplay?

Use the Bang & Olufsen app to configure and connect your Beoplay A9 2nd Gen to your network.

  1. Open the Bang & Olufsen app. Tap on “Add a product”.
  2. Connect the power cable. Connect your Beoplay A9 2nd Gen to the mains supply.
  3. Wait for the indicator to turn orange.
  4. Complete setup.

How do I connect my B&O E8 to Android?

Beoplay E8 Motion Android Bluetooth connection

  1. Turn on Bluetooth on your Android device.
  2. Verify if Beoplay E8 Motion are listed as an already paired device.
  3. Switch on your Beoplay E8 Motion.
  4. Enable pairing mode on your Beoplay E8 Motion by touching and holding both earbuds simultaneously for 3-5 seconds.

How do I connect my Beoplay E8 Bluetooth?

Connect to your favourite device

  1. Turn on Bluetooth on your device (phone, computer, tablet, etc.) to scan for new devices.
  2. Beoplay E8 Motion will appear as an available connection.
  3. Tap Beoplay E8 Motion to connect.
  4. Your Beoplay E8 Motion are now ready to be used.

Why is my Beoplay E8 not connecting?

Switch off or remove other Bluetooth connections in the surroundings and check if this solves the issue. Alternatively, go to another location, such as an elevator or outside, where Bluetooth interference from other products is less likely and check if the connection works.

How do I reset my Beoplay E8?

Beoplay E8 Motion factory reset

  1. Reset your Beoplay E8 Motion by touching and holding both earbuds simultaneously for about 10 seconds until the indicator on the right earbud starts flashing red.
  2. Remove all previously paired connections of Beoplay E8 Motion from your mobile device.
  3. Switch off your mobile device.

How do you pair a B&O speaker?

You can connect new speakers to Beolink Multiroom using the Bang & Olufsen app.

  1. Plug in your speaker and wait for a minute.
  2. Go to the Bang & Olufsen App and follow the instructions to add the speaker or speakers to your home network.
  3. Once added, the speakers will automatically appear in the app.

Why are my Beoplay E8 not working?

You can restart your Beoplay E8 by placing both earbuds in the charging case and then charging the case using the Micro-USB cable. After a few seconds, remove the earbuds from the charging case, touch the right earbud to switch them on and then start playback.

How do I reset my B&O E8 headphones?

Beoplay E8 factory reset

  1. Reset your Beoplay E8 by touching and holding both earbuds simultaneously for about 10 seconds until the indicator on the right earbud starts flashing red.
  2. Remove all previously paired connections of Beoplay E8 from your mobile device.
  3. Switch off your mobile device.

How do you turn on Bluetooth on B&O?

Trigger Bluetooth pairing mode

  1. Once the battery status light indicator has turned off, press and hold the touch field on both the left and right earphone for 6 seconds to trigger Bluetooth pairing mode.
  2. The light indicator on the charging case will flash blue until paired successfully.