What does Seemp mean?
Ship Energy Efficiency Management Plan (SEEMP) and Energy Efficiency Operational Indicator (EEOI) The Ship Energy Efficiency Management Plan (SEEMP) is an operational measure that establishes a mechanism to improve the energy efficiency of a ship in a cost-effective manner.
What is the purpose of MEPC?
The Marine Environment Protection Committee (MEPC) is a subsidiary body of the Council. MEPC, which consists of all Member States, is empowered to consider any matter within the scope of the Organization concerned with prevention and control of pollution from ships.
What is EEXI and Eedi?
EEXI – Efficiency Existing Ship Index The EEXI is like its predecessor, the Energy Efficient Design Index (EEDI)—in effect since 2013—but applied to existing ships outside EEDI regulations. It specifically targets vessels above 400 GT that fall under MARPOL Annex VI.
What is Eedi in ship?
Energy Efficiency Design Index (EEDI), formulated for new ships, is an index that estimates grams of CO2 per transport work (g of CO2 per tonne-mile). It can be expressed as the ratio of “environmental cost” divided by “Benefit for Society”.
What are the requirements under Seemp?
A SEEMP should be provided on all ships of 400 gt and above and for existing ships it should be provided at the IEEC intermediate or renewal survey. A SEEMP is not required for platforms (including FPSOs and FSUs) and drilling rigs, regardless of their propulsion.
Who approves Seemp?
Approval by the Administration or a Recognized Organization (RO) on behalf of the Administration is NOT mandatory, however, the Administration should ensure that each ship’s SEEMP complies with regulation 22.2 of MARPOL Annex VI prior to collecting any data.
What is IMO MEPC?
The Marine Environment Protection Committee (MEPC) addresses environmental issues under IMO’s remit.
Who are the MEPC?
How is EEDI calculated on a ship?
Required EEDI = a · b-c Table 1.1 lists the ship type depending calculation values for the required EEDI. The required EEDI will be reduced by X % each five years based on the initial value (Phase 0) and depending on the vessel size. Below a certain size no reduction applies.
What is Seemp in Marine?
The SEEMP is a plan which is ship specific and has to be implemented according to the ship type, cargoes carried, ship routes, and other relevant factors. Hence, SEEMP cannot be implemented on a company or fleet level.
What is Marpol Seemp?
The Ship Energy Efficiency Management Plan (SEEMP) is an operational measure that establishes a mechanism to improve the energy efficiency of a ship in a cost-effective manner.
What are the four steps in implementing Seemp?
The SEEMP approach seeks to improve a ship’s energy efficiency through four steps: ❖ Planning, ❖ Implementation, ❖ Monitoring, ❖ Self-evaluation and Improvement.
Who prepares Seemp?
213(63) – 2012 Guidelines for the development of a Ship Energy Efficiency Management Plan”. The ship owner is obliged to develop a SEEMP taking into account the guidelines adopted by the International Maritime Organisation.
What is the relation between CII and Seemp?
What is the relation between the CII and the SEEMP? Answer: Answer: A strengthening of the SEEMP (enhanced SEEMP) to include mandatory content is a part of the CII regulation.
What is MEPC IMO?
What is Resolution MEPC?
Resolutions are published in the final report of the Committee meeting during which they were adopted. They may appear as an Annex to the meeting report. Document symbols for resolutions include the resolution number and session information.
What is Seemp Part II?
The SEEMP Part II has 9 sections: Ship particulars. Record of revision of fuel oil consumption data collection plan. Ship engines and other fuel oil consumers and fuel oil types used.
What is seemp Part II?
Approval and Certification Services Digital & Innovation From 1st January 2019 ships of 5,000 GT and above need to have a Data Collection Plan (SEEMP Part II based on MEPC 282 (70)) alongwith a Confirmation of Compliance onboard and collect the data as specified in Appendix IX of MARPOL Annex VI.
What are the requirements for the amended MARPOL Annex VI?
The amended MARPOL Annex VI requires the following: • A new ship energy efficiency management plan (SEEMP) Part II, approved by the TSO or Flag; • Data (e.g. fuel consumption, distance travelled, hours underway) to be collected on a calendar year basis;
When does a ship’s seemp need to be updated?
By 31 December 2018, at the latest, the ship’s SEEMP shall be updated to include a description of the methodology that will be used to collect the data and the processes that will be used to report the data to the Flag/RO (i.e. SEEMP Part II).
Do I need a seemp?
It is an IMO requirement to have a SEEMP on-board all existing and new applicable ships from 1st January 2013. SEEMP should be customised to the characteristics and needs of individual companies and ships; therefore it is a ship-specific plan.