How do I connect my Cisco router to an Ethernet cable?
Step 1 Connect one end of the yellow Ethernet cable to an Ethernet switch port on the router. Figure 3-1 shows a Cisco 888W router connected to a PC. Step 2 Connect the other end of the cable to the RJ-45 port on the network interface card (NIC) that is installed in the PC, server, or workstation.
What cable connects Cisco switch to router?
Normal Ethernet Cables This type of cable is a “regular” or straight-through cable. You use this type of cable to connect a PC to a hub/switch or a router to a switch. You should also know that there are two standards for how the colors are arranged on this cable.
Can I connect to a Cisco switch using Ethernet cable?
This chapter describes how to connect the Cisco Nexus 6000 Series switches to the following types of ports: Console port —A port that you can use to create a local management connection. Ethernet ports, both encrypted and unencrypted—These ports can be used to connect to a LAN.
Does a switch need to be connected to a router?
So while you can use a switch to create a LAN that networks local devices without a router, the devices all have to be connected by physical Ethernet cables. In addition, you wouldn’t be able to effectively share an internet connection between all of the devices without connecting the switch to a router.
Can you use an Ethernet cable as a console cable?
Each device has a console port which you can connect to using an Ethernet cable with an RJ-45 connector. Use the console port to connect the device to the console server or management console. The console port accepts a cable that has an RJ-45 connector.
Which cable is Cisco console cable?
Rollover cable (also known as a Yost cable, Cisco cable, or a Console cable) is a type of null-modem cable that is used to connect a computer terminal to a router’s console port. This cable is typically flat (and has a light blue color) to help distinguish it from other types of network cabling.
How do I connect my router to my console cable?
To connect your laptop to the console port on your router:
- Plug the serial DB-9 end of the console cable into the serial DB-9 port on your laptop.
- Plug the Ethernet RJ-45 end of the console cable into the console port on the router.