Menu Close

Can you use regular skis for alpine touring?

Can you use regular skis for alpine touring?

Technically, you can use most any ski for backcountry touring as long as you have boots and bindings that allow you to lift your heels to walk (“skin”) uphill (with the help of climbing skins) and then to lock them back into the bindings for the descent.

How do you choose alpine touring skis?

If you are a classic ski tourer, choose a wide waist width of around 75-90mm. Soft skis with a short sidecut radius of around 15m will be easier to use and less demanding in the descents. Favor more rigid and straighter skis if you ski in the springtime, in couloirs or on steep terrain.

Can you downhill ski with alpine touring skis?

Absolutely you can use touring skis and bindings for downhill resort skiing.

Can you use alpine touring skis for downhill?

Absolutely! In the last few years a lot has happened and our touring skis work very well on the slopes. Although you should adjust your speed in icy conditions, our touring skis basically react similar to alpine skis. This means that you don’t have to adapt off-piste and you can simply keep your usual riding technique.

What length touring ski should I get?

Touring skis should be 5-15cm less than the skier’s height. Touring ski length is a balance between lightweight maneuverability on the way up and stability on the way down. Freeride skis should be at least the skier’s height and can easily be 5-15cm longer for skilled skiers.

How do you know what size touring skis to get?

These skis both cover any and all terrain in a wide variety of conditions, but they would require different lengths if the same skier were to buy a pair of each. Touring skis should be 5-15cm less than the skier’s height.

Can you use alpine touring skis for cross-country?

Alpine touring (AT) skis are a blend between cross-country and downhill skis. There is no camber. They are able to form a nice full rockered edge that will perform a turn like on a downhill ski.

How long should my ski touring skis be?

10 to 20cm under your height is about right. In general, tall or big skiers will have skis arouns 160cm, shorter skiers will stick with 150cm lengths. If you like climbing on the side of groomed slopes, you can add a few centimeters in order to gain comfort and stability on the downhill.

How to choose alpine touring skis?

Up to 84mm: Designed to be light and fast,for when you’re focused on going up more than going down,such as in skimo.

  • 85–99mm: Great all-around skis. Not the best in powder,but easy to handle in mixed conditions.
  • 100–109mm: Mostly for powder,but also very good in mixed conditions.
  • 110mm and up: Powder 90% of the time.
  • What are the best skis for alpine racing?

    Allround Skis. Allround skis are the most common type of ski,and are intended to be reasonably good for most types of skiing.

  • Beginner Skis. Beginner skis are normally shorter,lighter,and more flexible.
  • Slalom Race Skis.
  • Freestyle Skis.
  • Powder Skis.
  • Giant Slalom Skis.
  • Downhill Skis.
  • What equipment is used in alpine skiing?

    – XS (1) – Small (13) – Medium (14) – Medium/Large (2) – Large (25) – XL (5) – One Size Fits All (12) – Other / Unknown (2)

    Which is ski binding for alpine touring?

    Alpine touring ski boot, binding, and ski crampon. A ski binding is a device that connects a ski boot to the ski. Generally, it holds the boot firmly to allow the skier to maneuver the ski. However, if certain force limits are exceeded, it releases the boot to minimize skier injury, such as in the case of a fall or impact.