Menu Close

Are kitchen drawers a standard size?

Are kitchen drawers a standard size?

Standard non-custom kitchen cabinetry generally offers drawer widths from 12 inches to 24 inches, increasing by 3-inch increments. If the standard drawers available don’t fit into your kitchen design, you can order custom drawers from a cabinetmaker.

What is a good size kitchen drawer?

24 inches is a moderate size that looks good in most kitchens. 30 inches are for those looking to add pull-out drawers or perhaps use the space for more food storage.

What size should my kitchen drawers be?

We prefer them to be about 30″ in width if your kitchen allows it and 36″ is even better. Their depth will be dependant upon the depth of your base cabinet, which is typically 24″, 30″, or 36″ for standard cabinetry.

What sizes do kitchen drawers come in?

For standard widths measurements, most manufacturers offer base units measuring 48, 36, 33, 30, 24, 18, 12, and 9 inches. Base units with smaller widths can accommodate drawers of similar width, and such units get used for the filler cabinets.

Can you buy just cabinet drawers?

It is possible to buy new kitchen drawers to replace existing ones. This is because the base cabinets in your kitchen were likely built with standardized sizing. These universal sizes are designed for ideal heights and depths.

Can I buy replacement kitchen drawers?

Both ranges are available as replacement drawers or internal kitchen drawers, and can be installed in any kitchen or bedroom cabinet. Our complete drawer box kits come with draxer sides, drawer runners, base and back panels, all screws or hardware, and the Blum Lifetime Warranty Certificate.

How wide is a typical kitchen drawer?

A kitchen drawer will have a standard depth of 24 inches (61 cm), and height of 34.5 inches or 87.6cm. The widths will vary with base units of 9, 12, 18, 24, 30, 33, 36, and 48 inches.

What is standard drawer size?

You can expect to find 5 inch or 7-inch-high drawers in 18-inch, 24-inch and 30-inch widths with a 14-inch depth.

How wide is too wide for kitchen drawers?

Description. Wide cabinet drawers are popular these days, but how wide is too wide? The rule of thumb is 1.5 times the length of the drawer slide.

How wide should drawers be?

This is typical on most kitchen cabinets. Drawers can be built almost any width for bottom mount, but the most common size is 3/4-inch smaller on both sides than the cabinet opening. For example, if the opening is 12 inches wide, the drawer should be built 10 1/2 inches wide.

Can you buy drawers for kitchen cabinets?

What size are most kitchen drawers?

Kitchen drawers, or drawer boxes, correspond with the size of your cabinets and their intended uses: For base cabinets, drawers range 6-36″ in width, 4-10″ in height, and just under 24-36″ deep, depending on the depth of the base cabinet (which could also be the island).

How Big Should kitchen drawers be?

The rule of thumb is 1.5 times the length of the drawer slide. If you have a standard depth kitchen cabinet then the normal length of drawer slide is 22”. If you multiply 22” x 1.5 = 33”. You can go wider, but the wider you go the more chance that the slide will not pull out as smoothly as you hope or expect.